The Enhanced 90-Line: Right Angle Beam Bender
July 2006, Newburyport, Massachusetts: Pinpoint Laser Systems®, Inc., is introducing a new right angle beam bender called the 90-Line. The 90-Line takes the reference laser beam from the Microgage 2000 and turns it precisely 90 degrees. The 90-Line can be used to square machinery and equipment, set and adjust parallel tracks and rails, align web rollers, idlers, and reels, check gantry travel and position, monitor and adjust machine tools, and assist in geometric alignment.
The 90-Line is built with a durable housing for holding precision optical elements that redirect the laser beam. The exiting laser is square to the incoming beam within 0.0006 degrees, or equivalent to 0.001 inch over a distance of eight feet. The housing has several adjustments, allowing the square exiting beam to rotate through a full plane. The beam can be adjusted with a precision rotary mount, and a 2-axis stage mount makes positioning the 90-Line a snap. The 90-Line is machined from solid, aluminum block and is protected with a hard, anodized coating.
The Laser Microgage and 90-Line are designed and manufactured in the U.S., and you will find them at work in factories, machine shops, shipyards, utilities, roll mills, printing and converting plants, and even in pet food manufacturing!.
For additional press information or story information on this newest product innovation please contact Pinpoint at 1-800-757-5383 or visit our website at www.pinlaser.com
