Laser Alignment Equipment & Kits
Laser Microgage 2000: Specifications & Dimensions
| Measurement Resolution: | 0.0001 inch |
| Resolution with Interface: | 0.00005 inch |
| Measurement Range: | 1 inch (± 0.500), 0.5 inch, 3 inches |
| Operating Distance: | 0 to 90 feet |
| Enhanced Operating Distance: | > 100 feet |
| Measurement Accuracy: | < 0.0005 inches |
| Laser Characteristics: | 635nm, laser diode |
| Laser Beam Accuracy: | Less than or equal to 2 Arc-Seconds |
| Laser Beam Repeatability: | Less than or equal to 1 Arc-Second |
| Suggested Warm Up Time: | 5 minutes |
| Laser Leveling Vial: | Bubble Type: Less than 10 Arc-Second |
| Laser Power: | Battery Pack, 3 AA Batteries |
| Laser Run Time: | 20 hours, continuous |
| Laser Mounting: | 1/4–20 & 10–32 threaded holes |
| Laser Surface Finish: | Machined and ground flat, hard anodized coating |
| Receiver Display: | LCD for reading, signals & icons |
| Receiver Controls: | Function, Up, Down, Power, Units, Offsets, Average, etc. |
| Receiver Units: | Inch, Mils, Millimeters, Other |
| Connections: | Receiver input, output interface |
| Receiver Options: | Interchangeable modules |
| Receiver Interface: | USB , Serial RS232C and software |
| Receiver Power: | 9 volt battery |
| Receiver Run Time: | 40 hours, continuous |
| Receiver Housing: | Machined aluminum, hard anodized |
| Operating Conditions: | 30°F to 130°F (–1°C to +55°C) Humidity 0 to 95% non-condensing |
| Dimensions: | |
| Laser Transmitter: | 7.0″L × 1.25″W × 3.0″H |
| Receiver (standard): | 2.0″L × 1.25″W × 2.5″H |
| Display Unit: | 8″L × 5″W × 1.5″H |
Pinpoint Laser Systems: Improving manufacturing efficiency, one plant at a time.